Kellermann Rear, brake, turn signal unit Bullet 1000 DF

Product ref.: sy-200.251
Fabrikant: P&W accessories

Rear-, brake light, turn signal unit Bullet 1000 DF, clear glass, E-tested as rear turn signal and rear light, piece

(Opgelet, het product kan afwijken van de foto.)

Geef hier je beoordeling van dit product

Beoordeling: 0 / 5 (gebaseerd op 0 beoordelingen)

Kellermann Rear, brake, turn signal unit Bullet 1000 DF

€ 109,95 € 98,95 In voorraad

Voor maandag 15u besteld, doorgaans rond dinsdag 30 apr. in huis (België)
Meer info

Aantal:

Productdetails

Bullet 1000 DF with clear glass

Made in Germany
ECE approved for rear
Replace the existing brake/tail light as well as the turn signals
Unique homogeneous light ring
Extreme light output
HPT - Homogenous Projection Technology
Kellermann HighPower LED Technology
Long Life Protection Guard®, IC controlled,
330 kHz clocked
High-quality metal housing
Suitable for 12 volt vehicle electrical systems
With M8 x 20 mounting thread
European protected design

Classic meets high-tech

With the Bullet 1000, the aim was to redefine the classic bullet shape via the clear Kellermann design and to equip it with the latest electronics. A highlight of the product is the newly developed lighting technology (Kellermann-HPT), which enables a homogeneous, ring-shaped beam and sets new standards. Because design quality does not end with the product shape and the product surface, but is also defined by the light emitted. The high-quality processed metal housing with a maximum diameter of 39 mm appears discreetly as a piece of jewellery on the motorcycle and is available in the surface variants chrome, black as well as matt chrome. The Bullet 1000 therefore fits any sophisticated bike design. The Bullet 1000 is available in 3 technology variants: extreme turn signal, turn signal with yellow position light and turn signal with brake/rear light.

Bullet 1000 DF

The Bullet 1000 DF represent the variant for mounting as rear turn signals with integrated brake / taillight function. They replace the existing turn signals, brake light and tail light. The light from the two permanently illuminated red rings gives the rear of the motorcycle a spectacular look**. When braking, these rings shine extremely brightly and thus reliably attract the attention of following traffic. The Bullet 1000 DF can be ideally combined with the Bullet 1000 PL or the Bullet 1000 Extreme.

A load-independent relay or power resistors may be required to adjust the flashing frequency.
Combination of IC controlled LONG LIFE PROTECTION GUARD® circuit with high power LEDs of latest design.