Fine black gravel guard (400 ml)

Protect rocker panels and door sills from corrosion and stone chipping, protect wheel arches, insulate and protect the chassis, insulate joints and welds, treat the rear of the bonnet or tailgate. It can also be used to soundproof various parts of the vehicle.

After application and thorough drying, forms an elastic, wear-resistant protective coating with good adhesion. Effective protection against stone chips and corrosion. Can be painted if completely dry. Synthetic resin and rubber-based product for long-term protection of gravel in wheel arches, sills, side skirts, etc. Provides a rigid, elastic and structured coating. Excellent protection against rust and gravel. Soundproofing properties reduce noise inside cars. This exclusive formula provides an incomparable filler thickness and finish. * Exclusive high thickness formula * Does not become porous when solvents evaporate * Remains flexible for optimum protection * Can be repainted

Technical data:

• Base: synthetic resins and rubbers
• Physical state: viscous fluid
• Density: 1100 g/l +/- 20 g/l
• Chemical reaction: neutral
• Flash point: less than 21 °c afnor closed cup.
• Packaging: 400 ml
• Odour: characteristic of solvent
• Colour: black
• VOC content: 66.85% by mass

Storage:

• For long-term storage, keep in a dry, well-ventilated area away from direct sunlight and frost.
• Recommended storage temperature 15°C - 30°C.
• Recommended application temperature 20°C

Instructions for use: IMPORTANT, shake the aerosol for at least two minutes from the time the sound of the mixing beads can be heard. The parts to be treated must be clean, dry and free from all traces of grease, oil or corrosion. Mask the parts that are not to be treated. Apply an even coat from a distance of 25 - 30 cm. Do not apply to parts that can be dismantled, such as the engine, brakes or exhaust. To maintain a short drying time, avoid overloading with product. Purge the aerosol upside down after use. If residue remains on the nozzle, clean it with an appropriate product. Optimum temperature for use: 20-25°C. Can be covered by most current lacquers after 120 minutes. Through-drying after 24 hours.