Nuts & bolts

Titanium Axle Nut. Machined from grade 5 Titanium. This item fits many models of bikes as a wheel and/or swingarm axle Nut. It is highly corrosion resistant and an incredible 40% lighter than steel original! Listed in model specific bike sections where fitment has been established.

Handy pack of the most popular sizes nuts, bolts and washers. 25 pieces in total. Just pick your colour. Material High Tensile Anodised Aluminium. Long bolts easy to chop down to the required length.

Handy pack of the most popular sizes nuts, bolts and washers. 25 pieces in total. Just pick your colour. Material High Tensile Anodised Aluminium. Long bolts easy to chop down to the required length.

Our Race -Spec bolts are Pre -drilled on the flats not only for ease of lockwiring, but they look trick. Idea for use on engine casing bolts, bolting on plastics and other non -stress areas. with the Pro-Bolt name.

Aluminium Dome Head Bolt M4 x (0.7mm) x 12mm Pack x 10 Orange 0.7mm pitch Dome 8mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.

Aluminium Dome Head Bolt M4 x (0.7mm) x 12mm Pack x 10 Purple 0.7mm pitch Dome 8mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.

Aluminium Sprocket Nuts 12mm Pack x 6 Manufactured using Aerospace High Tensile Anodised Aluminium then fitted with a steel helicoil for additional strength. Supplied with fitment instructions which specify a lower torque setting of 33ft/lb or 44 Newton Metres. Nuts have a 19mm Socket Size. NB Nuts have a flange diameter of 24mm

New Black Titanium flanged hex heads! Supplied here in a long lasting finish resulting from an application of Diamond Like  Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating. This head design integrates a washer to spread the load. Combine this with rolled threads and we have one tough but light weight titanium bolt. No wonder they are commonly found on British, World and GP Superbikes! Please note the colour finish on Titanium is not identical to our Aluminium range.

Aluminium Dome Head Bolt M6 x (1.00mm) x 25mm Pack x 10 Orange 1.00mm pitch Dome 16mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.

Aluminium Dome Head Bolt M6 x (1.00mm) x 25mm Pack x 10 Red 1.00mm pitch Dome 16mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.

Aluminium Countersunk Bolt M5 x (0.8mm) x 35mm Pack x 10 High Tensile Anodised Aluminium Countersunk Bolts are measured in length including the head, bolts. We can supply countersunk washers separately which are designed to be used with this type of bolt. Ideal where a large diameter spread is required to prevent bolts pulling through bodywork etc and where a low head profile is essential. By using a separate Bolt and Washer we can obtain a larger outside diameter than would otherwise be possible.

0.8mm pitch Dome 12mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium Pk x 10

New Black Titanium flanged hex heads! Supplied here in a long lasting finish resulting from an application of Diamond Like  Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating. This head design integrates a washer to spread the load. Combine this with rolled threads and we have one tough but light weight titanium bolt. No wonder they are commonly found on British, World and GP Superbikes! Please note the colour finish on Titanium is not identical to our Aluminium range.

Aluminium Full Nuts M5 Pack x 10 0.8mm pitch. 8mm socket size. Standard Full Nut. Material High Tensile Anodised Aluminium.

Standard Flat Washer 9mm O/D 0.8mm Thick. Material High Tensile Anodised Aluminium. Pk x 10

Aluminium Countersunk Bolt M6 x (1.00mm) x 35mm Pack x 5 High Tensile Anodised Aluminium Countersunk Bolts are measured in length including the head, bolts. We can supply countersunk washers separately which are designed to be used with this type of bolt. Ideal where a large diameter spread is required to prevent bolts pulling through bodywork etc and where a low head profile is essential. By using a separate Bolt and Washer we can obtain a larger outside diameter than would otherwise be possible.

0.8mm pitch Dome 12mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium Pack x 5

Aluminium Countersunk Bolt M6 x (1.00mm) x 25mm Pack x 5 High Tensile Anodised Aluminium Countersunk Bolts are measured in length including the head, bolts. We can supply countersunk washers separately which are designed to be used with this type of bolt. Ideal where a large diameter spread is required to prevent bolts pulling through bodywork etc and where a low head profile is essential. By using a separate Bolt and Washer we can obtain a larger outside diameter than would otherwise be possible.

Pro-Bolt's unique design of Tapered Socket Cap bolts - the head gently tapers in towards the top of the bolt, offering streamlined goods looks. Ideal for fitment in areas of limited access Polished to a mirror finish.

Aluminium Allen Bolt M5 x (0.8mm) x 25mm Pack x 5 High Tensile Anodised Aluminium Bolts 0.8mm pitch 4mm Allen Key Drive. NB length measurement is taken from under the head...

Pro-Bolt's Unique Design of Tapered Socket Cap Bolts. The head gently tapers towards the top of the bolt, offering streamlined goods looks, 40% weight saving and high corrosion resistance. Please note that our coloured Titanium is not identical to our Aluminium range.

High Tensile Aluminium Special Flared Cup Washer with: 25mm Outside Diameter 7mm Height Please Note: Bolts are supplied separately, washer will accommodate Pro-Bolt Standard Socket Cap bolts

Well nut to accept M8 x 1.25mm bolt Inside Diameter 8mm Outside Diameter 15mm Length 28mm Priced individually

Aluminium Dome Head Bolt M5 x (0.8mm) x 16mm Unsure what size you need? Why not order one of our progauges and double -check? Take a look here

Aluminium Allen Bolt M6 x (1.00mm) x 90mm Silver 1.00mm pitch 5mm Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium. NB 18mm Threaded