Product type: 20W50 | Type: Synthetic
ProPulse TT V-Twin 20W-50 Ester - Full synthetic
Vulcanet - Washing without water - Box of 6 pieces
Stainless Steel fairing bolt kit. All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable on standard models. Kits are easy to use, remove one bolt at a time, and replace with an identical length Pro-Bolt into your original backing clip. Where this is not possible we include appropriate nuts. However should you wish to replace any worn original receptacles they are available to order separately. Our Stainless Steel dome head fairing bolts are made from grade 316 which are polished to a high mirror finish and the best part is they will never rust, just fit and forget. Customise not compromise! You'll be amazed at the difference. Also included in the kit are pro -lube, anti -scratch washers and relevant Allen keys. Please note screen kits are sold separately. Prefer something a little more subtle? This kit is also available in Black Stainless Steel which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.
Rear bikestand - axle right - specific for Ducati
Stainless Steel Side Engine Covers Bolt kit. Sold here in our popular sleek tapered socket cap design, this kit includes all the bolts required to replace the bolts in the side engine casings. This will include (where applicable) - clutch covers - water pump housing - alternator cover - sprocket covers Manufactured from 316 Stainless Steel which offers fantastic corrosion resistance and durability. They are machined with rolled threads to give extra strength and polished to a smooth mirror finish. The perfect upgrade from rusty originals. Bolts supplied in this kit are primarily 6mm thread diameters with a 5mm Allen key drive Kits are easy to use, remove one bolt at a time and replace with an identical length Pro-Bolt. Also included in the kit: - Copper Grease Sachet - Relevant Allen keys - Pro-Bolt Decal Sticker Please note: - Some kit listings may show generic kit photographs, and may not show the exact kit supplied. - Instructions provided for torque settings Stainless Steel is also available in black, which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.
Material: Aluminium
Quick release fastener 17mm + rivet-on receptical - 10 pieces
Radiator coolant Longlife G12+ -36°C - Red - 20L
Color: Rood
Chain tighteners (complete set: 2 blocks + 2 bolts + 2 nuts)
Color: Blauw
Chain tighteners (complete set: 2 blocks + 2 bolts + 2 nuts)
Titanium Front Brake Caliper Mount Bolt Kit. To mount the front caliper to the fork leg. An area of the bike that quickly suffers from rust and corrosion. This kit offers better corrosion resistance and is 40 percent lighter than the original bolts. Can be torqued to the manufacturers original setting. Please note the colour finish on titanium is not identical to our Aluminium range. Black Titanium: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.
Titanium Disc Rotor bolts. A must for any racer or those who simply wish to replace rusty originals! A replica of manufacturers original design but in superior quality material. Our Titanium 6Al -4V (grade 5) bolts are highly corrosion resistant, extremely light (40% weight saving!) and with rolled threads offers excellent strength and quality. Please refer to our product packaging supplied with the goods for torque settings. Why not check out our model specific listing and upgrade you caliper bolts at the same time? Please note if a coloured finish is selected in titanium this may not be identical to our Aluminium range.
Front stand - under fork - adaptable
Material: Aluminium
Aluminium Fairing Kit BMW R1150RT 01-05
All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable. Kits are easy to use remove one bolt at a time, and insert an identical length Pro-Bolt in to your original backing clip. Where this is not possible we include appropriate nuts
. Should you wish to replace any worn original receptacles they are available to order separately.
Our Aluminium dome head fairing bolts are made from Grade 7075 which is an incredible 60% lighter than your originals. With 7 colour options available, you choose the look; from bright blue to subtle silver our Aluminium fairing kits are a great way to customise your bike and make it truly unique.
Also included in the kit are Pro -Lube, Anti -Scratch washers and the relevant Allen keys. Instructions are provided for torque settings.
Please note screen kits are sold separately.
Aluminium Quick Release/Clip 6 Allen Key 17mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our Allen Key 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Supplied here in packs of 10 with anti -scratch washers, steel 'Grippa' washers to prevent the fastener from dropping out when released, rivet on backing clips and rivets.
Titanium Top Bottom Triple Clamp Bolt Kit supplied in kit form. Bolts supplied will closely match the head design of original bolts. These are the fork to yoke clamp Bolts.
Aluminium Quick Release/Clip 3 Allen Key 14mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our Allen Key 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti -scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Complete with Slide on Receptacles.
Aluminium Chain Adjuster Blocks + Bolts Honda 10 Set Gold Aluminium Chain Adjuster Blocks: Smarten up your rear end. Replace rusty originals with these shiny new blocks in High Tensile Anodised Aluminium. Supplied in pairs.
ProRacing GP - Radiator coolant - 2L
Titanium Front Axle Pinch Bolt Set DualDrive Black
Type: Semi-synthetic
Twostroke Outboard oil TC-W3 DFI - 4L - Semi-synthetic
Material: Aluminium
Aluminium Quick Release D-Ring 14mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our D-Ring 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Please note backing plates are not included but are available to order separately as both slide and rivet on fixings.
Material: Aluminium
Aluminium Quick Release D-Ring 17mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our D-Ring 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti -scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Please note backing plates are not included but are available to order separately as both slide and rivet on fixings.
Product type: 25W40 | Type: Semi-synthetic
Fourstroke oil In-Outboard 25W40 - 4L - Semi-synthetic
Set of Titanium Front Axle Pinch Bolts. High tensile 6Al -4V (Grade 5) Titanium. These bolts are prone to corrosion being at the front of the bike they take most of the dirt and road spray, our replacements have great resistance to corrosion and are an incredible 40% lighter than rusty steel originals and yet can still be torqued to manufacturers original settings. Upgrade your bolts! Please note the colour finish on titanium is not identical to our Aluminium range.
Color: Zwart
Chain tighteners (kit)
Color: Rood
Chain tighteners (kit)
Color: Gold
Chain tighteners (kit) - Gold
Color: Gold
Front brake fluid reservoir cover - Gold
Color: Rood
Chain tighteners (kit)
Color: Zilver
Chain tighteners (kit)
Color: Zilver
Chain tighteners (kit)
ProRacing GP - Brake cleaner liquid
Color: Rood
Pre-load adjusters
Color: Zilver
Pre-load adjusters
Color: Zwart
Pre-load adjusters
Color: Blauw
Pre-load adjusters
Stainless Steel Disc Rotor Bolts – Bolt set to mount the disc rotor to the wheel. A replica of the OEM design but manufactured in superior quality grade 316 Stainless Steel. Machined with rolled threads, polished to a smooth mirror finish and highly resistant to corrosion these bolts make a great replacement for rusty originals. Compliments front axle nuts perfectly. Sets are available for Front and Rear discs for most models where fitment has been established. Please see fitting instructions provided for the relevant torque settings. Stainless Steel is also available in black, which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.
Color: Blauw
Gear shift rod - 255mm
Color: Zilver
Gear shift rod - 214mm
Color: Blauw
Gear shift rod - 240mm
Material: Aluminium
Aluminium Fairing Kit Honda CBR1000 RR 04-05
All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable.
Kits are easy to use remove one bolt at a time, and insert an identical length Pro-Bolt in to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Our Aluminium dome head fairing bolts are made from Grade 7075 which is an incredible 60% lighter than your originals. With 7 colour options available, you choose the look; from bright blue to subtle silver our Aluminium fairing kits are a great way to customise your bike and make it truly unique.
Also included in the kit are Pro -Lube, Anti -Scratch washers and the relevant Allen keys. Instructions are provided for torque settings.
Please note screen kits are sold separately.
Titanium Axle Nut. Machined from grade 5 Titanium. This item fits many models of bikes as a wheel and/or swingarm axle Nut. It is highly corrosion resistant and an incredible 40% lighter than steel original! Listed in model specific bike sections where fitment has been established.
Color: Zwart
Front brake- or clutch oil reservoir cover
Color: Rood
Rear brake fluid reservoir cover
Color: Gold
Rear brake fluid reservoir cover - Gold
Handy pack of the most popular sizes nuts, bolts and washers. 25 pieces in total. Just pick your colour. Material High Tensile Anodised Aluminium. Long bolts easy to chop down to the required length.
Handy pack of the most popular sizes nuts, bolts and washers. 25 pieces in total. Just pick your colour. Material High Tensile Anodised Aluminium. Long bolts easy to chop down to the required length.
Opening hours customer service:
Mon-Fri: 9 am - 12 pm and 1 pm - 5 pm
Saturday: 9 am - 12 pm
ATTENTION: We are temporarily available by phone only from 1pm. For urgent questions, please email info@bike-design.com
Contact usBike Design Benelux accepts the following payment methods:
Bike Design helps passionate motorcyclists get the best out of their bike, since 1993. Our team rides off-roads, motorscooters, road race, Harley, touring bikes and allroads, so we know precisely how our products contribute to a better ride. Our shelves only contain products of which we are satisfied users ourselves.
Each year, over 1.000 motorcycle dealers and thousands of returning end users give us their faith – and feedback – so we know exactly what to recommend. So check out which renown brands we have in store for your bike and feel free to ask our opinion or advice!
Bike Design Benelux
Industrieterrein Hoogveld
Vriesenrot 14
B-9200
Dendermonde
Belgium
info@bike-design.be
Phone: +32 52 45.33.61
Fax: +32 52 45.33.71
VAT: BE 0451.634.077
