Ref: PB-LFB516XLB | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M5 x (0.8mm) x 16mm Blue 0.8mm pitch Dome 16mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.
€1.26
In stock Delivery time unknown ()
Ref: PB-LPB640B | Make: Pro Bolt aluminum & titanium
Aluminium Allen Bolt M6 x (1.00mm) x 40mm Blue 1.00mm pitch 5mm Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.
€1.27
In stock Delivery time unknown ()
Ref: PB-FB412-10O | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M4 x (0.7mm) x 12mm Pack x 10 Orange 0.7mm pitch Dome 8mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.
€16.95
In stock Delivery time unknown ()
Ref: PB-FB412-10P | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M4 x (0.7mm) x 12mm Pack x 10 Purple 0.7mm pitch Dome 8mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.
€16.95
In stock Delivery time unknown ()
Ref: PB-FB520-5R | Make: Pro Bolt aluminum & titanium
0.8mm pitch Dome 12mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium Pack x 5
€6.67
In stock Delivery time unknown ()
Ref: PB-FB625-10O | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M6 x (1.00mm) x 25mm Pack x 10 Orange 1.00mm pitch Dome 16mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.
€14.50
In stock Delivery time unknown ()
Ref: PB-FB625-10R | Make: Pro Bolt aluminum & titanium
Aluminium Dome Head Bolt M6 x (1.00mm) x 25mm Pack x 10 Red 1.00mm pitch Dome 16mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head. Material High Tensile Anodised Aluminium.
€14.50
In stock Delivery time unknown ()
Ref: PB-FSU078R | Make: Pro Bolt aluminum & titanium
Our Aluminium fasteners are made from 7075T6 Aluminium, and suitable for use in all non -safety critical areas. They are available in Black, Blue, Gold, Orange Purple, Red and Silver, so you can really make your bike stand out.
Our fairing kits include all the fasteners required to replace the original visible bolts (where applicable)on the:
- Side fairings
- Front mudguard
- Belly pan
- Seat unit
- Nose cone
Fairing kits usually contain a variety of sizes of dome head bolts.
Some kits however will also include Countersunk Bolts and Washers to replicate large headed bolts and Allen bolts to fit inrecesses.
Where Quick Release kits are available for certain models of bike, the 1/4 turn fasteners are offered with a choice of either D-Ring or Allen Key fastening. Clips are also included if applicable.
Kits are easy to use, remove one bolt at a time, and replace with an identical lengthPro-Boltin to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Also included in the kit is:
- Copper Grease Sachet
- Anti -scratch washers
- Plastic Tubing
- Relevant Allen keys
- Pro-Bolt Decal Sticker
€26.34
In stock Delivery time unknown ()
Ref: PB-FSU201BK | Make: Pro Bolt aluminum & titanium
Our Aluminium fasteners are made from 7075T6 Aluminium, and suitable for use in all non -safety critical areas. They are available in Black, Blue, Gold, Orange Purple, Red and Silver, so you can really make your bike stand out.
Our fairing kits include all the fasteners required to replace the original visible bolts (where applicable)on the:
- Side fairings
- Front mudguard
- Belly pan
- Seat unit
- Nose cone
Fairing kits usually contain a variety of sizes of dome head bolts.
Some kits however will also include Countersunk Bolts and Washers to replicate large headed bolts and Allen bolts to fit inrecesses.
Where Quick Release kits are available for certain models of bike, the 1/4 turn fasteners are offered with a choice of either D-Ring or Allen Key fastening. Clips are also included if applicable.
Kits are easy to use, remove one bolt at a time, and replace with an identical lengthPro-Boltin to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Also included in the kit is:
- Copper Grease Sachet
- Anti -scratch washers
- Plastic Tubing
- Relevant Allen keys
- Pro-Bolt Decal Sticker
€25.26
In stock Delivery time unknown ()
Ref: PB-FYA283SSBK | Make: Pro Bolt aluminum & titanium
Stainless Steel fairing bolt kit. All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable on standard models. Kits are easy to use, remove one bolt at a time, and replace with an identical length Pro-Bolt into your original backing clip. Where this is not possible we include appropriate nuts. However should you wish to replace any worn original receptacles they are available to order separately. Our Stainless Steel dome head fairing bolts are made from grade 316 which are polished to a high mirror finish and the best part is they will never rust, just fit and forget. Customise not compromise! You'll be amazed at the difference. Also included in the kit are pro -lube, anti -scratch washers and relevant Allen keys. Please note screen kits are sold separately. Prefer something a little more subtle? This kit is also available in Black Stainless Steel which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.
€146.25
In stock Delivery time unknown ()
Ref: PB-HX845R-5BKE | Make: Pro Bolt aluminum & titanium
Our Race -Spec bolts are Pre -drilled on the flats not only for ease of lockwiring, but they look trick. Idea for use on engine casing bolts, bolting on plastics and other non -stress areas. with the Pro-Bolt name.
€20.22
In stock Delivery time unknown ()
Ref: PB-LBUT6BK | Make: Pro Bolt aluminum & titanium
Aluminium Button Insert M6 Black The finishing touch. supplied with 'O' rings to form an airtight seal and keep out dirt. The size refers to the bolt thread diameter. Why not use in conjunction with our cup washers for a unique colour co -ordinated look? Available in M5, M6, M8 and M10. Material High Tensile Anodised Aluminium.
€1.06
In stock Delivery time unknown ()
Ref: PB-LCOLLAR5-7-10U | Make: Pro Bolt aluminum & titanium
Aluminium Collar( M5 Thread 7.5mm o/d 10mm length): Aluminium threaded collar, handy collars for use where original bolt has shoulder, these can be used with our bolts to act as a shoulder.
€0.41
In stock Delivery time unknown ()
Ref: PB-LCOLLAR5-7-5U | Make: Pro Bolt aluminum & titanium
Aluminium Collar M5 Thread 7.5mm o/d 5mm length: Aluminium threaded collar, handy collars for use where original bolt has shoulder, these can be used with our bolts to act as a shoulder.
€0.33
In stock Delivery time unknown ()
Ref: PB-LCS415B | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M4 x (0.7mm) x 15mm Blue Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.17
In stock Delivery time unknown ()
Ref: PB-LCS415R | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M4 x (0.7mm) x 15mm Red Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.17
In stock Delivery time unknown ()
Ref: PB-LCS450G | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M4 x (0.7mm) x 50mm Gold Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.26
In stock Delivery time unknown ()
Ref: PB-LCS520B | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M5 x (0.8mm) x 20mm Blue Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.36
In stock Delivery time unknown ()
Ref: PB-LCS520G | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M5 x (0.8mm) x 20mm Gold Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.36
In stock Delivery time unknown ()
Ref: PB-LCS520P | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M5 x (0.8mm) x 20mm Purple Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.36
In stock Delivery time unknown ()
Ref: PB-LCS520R | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M5 x (0.8mm) x 20mm Red Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.36
In stock Delivery time unknown ()
Ref: PB-LCS520S | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M5 x (0.8mm) x 20mm Silver Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.36
In stock Delivery time unknown ()
Ref: PB-LCS535R | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M5 x (0.8mm) x 35mm Red Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium. Supplied here individually
€1.36
In stock Delivery time unknown ()
Ref: PB-LCS535S | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M5 x (0.8mm) x 35mm Silver Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium. Supplied here individually.
€1.36
In stock Delivery time unknown ()
Ref: PB-LCS625B | Make: Pro Bolt aluminum & titanium
Aluminium Countersunk Bolt M6 x (1.00mm) x 25mm Blue Din 7991 Standard Countersunk Bolts with Allen Key Drive, length measurement is taken including the head. Material High Tensile Anodised Aluminium.
€1.29
In stock Delivery time unknown ()
Opening hours customer service:
Mon-Fri: 9 am - 12 pm and 1 pm - 5 pm
Saturday: 9 am - 12 pm
ATTENTION: We are temporarily available by phone only from 1pm. For urgent questions, please email info@bike-design.com
Contact usBike Design Benelux accepts the following payment methods:
Bike Design helps passionate motorcyclists get the best out of their bike, since 1993. Our team rides off-roads, motorscooters, road race, Harley, touring bikes and allroads, so we know precisely how our products contribute to a better ride. Our shelves only contain products of which we are satisfied users ourselves.
Each year, over 1.000 motorcycle dealers and thousands of returning end users give us their faith – and feedback – so we know exactly what to recommend. So check out which renown brands we have in store for your bike and feel free to ask our opinion or advice!
Bike Design Benelux
Industrieterrein Hoogveld
Vriesenrot 14
B-9200
Dendermonde
Belgium
info@bike-design.be
Phone: +32 52 45.33.61
Fax: +32 52 45.33.71
VAT: BE 0451.634.077
