Ref: PB-FYA283SSBK | Make: Pro Bolt aluminum & titanium
Stainless Steel fairing bolt kit. All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable on standard models. Kits are easy to use, remove one bolt at a time, and replace with an identical length Pro-Bolt into your original backing clip. Where this is not possible we include appropriate nuts. However should you wish to replace any worn original receptacles they are available to order separately. Our Stainless Steel dome head fairing bolts are made from grade 316 which are polished to a high mirror finish and the best part is they will never rust, just fit and forget. Customise not compromise! You'll be amazed at the difference. Also included in the kit are pro -lube, anti -scratch washers and relevant Allen keys. Please note screen kits are sold separately. Prefer something a little more subtle? This kit is also available in Black Stainless Steel which not only looks great but has other benefits too.. This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced. Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.
€146.25
In stock Delivery time unknown ()
Ref: pb-qrpackriv17 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Quick release fastener 17mm + rivet-on receptical - 10 pieces
From €88.05
In stock Delivery time unknown ()
Ref: pb-fbm060 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Fairing Kit BMW R1150RT 01-05
All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable. Kits are easy to use remove one bolt at a time, and insert an identical length Pro-Bolt in to your original backing clip. Where this is not possible we include appropriate nuts
. Should you wish to replace any worn original receptacles they are available to order separately.
Our Aluminium dome head fairing bolts are made from Grade 7075 which is an incredible 60% lighter than your originals. With 7 colour options available, you choose the look; from bright blue to subtle silver our Aluminium fairing kits are a great way to customise your bike and make it truly unique.
Also included in the kit are Pro -Lube, Anti -Scratch washers and the relevant Allen keys. Instructions are provided for torque settings.
Please note screen kits are sold separately.
From €80.60
In stock Delivery time unknown ()
Ref: PB-QRPACKAKRIVET17 | Make: Pro Bolt aluminum & titanium
Aluminium Quick Release/Clip 6 Allen Key 17mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our Allen Key 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Supplied here in packs of 10 with anti -scratch washers, steel 'Grippa' washers to prevent the fastener from dropping out when released, rivet on backing clips and rivets.
From €68.81
In stock Delivery time unknown ()
Ref: PB-QRPACKAKSLIDE14 | Make: Pro Bolt aluminum & titanium
Aluminium Quick Release/Clip 3 Allen Key 14mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our Allen Key 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti -scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Complete with Slide on Receptacles.
From €66.20
Sold out
Ref: pb-qrclip1014 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Quick Release D-Ring 14mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our D-Ring 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Please note backing plates are not included but are available to order separately as both slide and rivet on fixings.
From €58.56
Sold out
Ref: pb-qrclip1017 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Quick Release D-Ring 17mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our D-Ring 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti -scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Please note backing plates are not included but are available to order separately as both slide and rivet on fixings.
From €58.56
In stock Delivery time unknown ()
Ref: pb-fho212 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Fairing Kit Honda CBR1000 RR 04-05
All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable.
Kits are easy to use remove one bolt at a time, and insert an identical length Pro-Bolt in to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Our Aluminium dome head fairing bolts are made from Grade 7075 which is an incredible 60% lighter than your originals. With 7 colour options available, you choose the look; from bright blue to subtle silver our Aluminium fairing kits are a great way to customise your bike and make it truly unique.
Also included in the kit are Pro -Lube, Anti -Scratch washers and the relevant Allen keys. Instructions are provided for torque settings.
Please note screen kits are sold separately.
From €60.45
In stock Delivery time unknown ()
Ref: PB-TINUT24150002Z2B | Make: Pro Bolt aluminum & titanium
Titanium Axle Nut. Machined from grade 5 Titanium. This item fits many models of bikes as a wheel and/or swingarm axle Nut. It is highly corrosion resistant and an incredible 40% lighter than steel original! Listed in model specific bike sections where fitment has been established.
€40.49
In stock Delivery time unknown ()
Ref: PB-WSKIT25G | Make: Pro Bolt aluminum & titanium
Handy pack of the most popular sizes nuts, bolts and washers. 25 pieces in total. Just pick your colour. Material High Tensile Anodised Aluminium. Long bolts easy to chop down to the required length.
€38.27
In stock Delivery time unknown ()
Opening hours customer service:
Mon-Fri: 9 am - 12 pm and 1 pm - 5 pm
Saturday: 9 am - 12 pm
ATTENTION: We are temporarily available by phone only from 1pm. For urgent questions, please email info@bike-design.com
Contact usBike Design Benelux accepts the following payment methods:
Bike Design helps passionate motorcyclists get the best out of their bike, since 1993. Our team rides off-roads, motorscooters, road race, Harley, touring bikes and allroads, so we know precisely how our products contribute to a better ride. Our shelves only contain products of which we are satisfied users ourselves.
Each year, over 1.000 motorcycle dealers and thousands of returning end users give us their faith – and feedback – so we know exactly what to recommend. So check out which renown brands we have in store for your bike and feel free to ask our opinion or advice!
Bike Design Benelux
Industrieterrein Hoogveld
Vriesenrot 14
B-9200
Dendermonde
Belgium
info@bike-design.be
Phone: +32 52 45.33.61
Fax: +32 52 45.33.71
VAT: BE 0451.634.077
