Ref: PB-BARENDBM20R | Make: Pro Bolt aluminum & titanium
Aluminium Pair Bar Ends BMW S1000RR Red High Tensile Anodised Aluminium Bar Ends .A bit of colour where you can see it. These are supplied complete with necessary fittings.
€29.25
In stock Delivery time unknown ()
Ref: PB-BARENDSU60R | Make: Pro Bolt aluminum & titanium
Aluminium Pair Bar Ends Red High Tensile Anodised Aluminium Bar Ends .A bit of colour where you can see it. These are supplied complete with necessary fittings.
€28.86
In stock Delivery time unknown ()
Ref: PB-RESO10G | Make: Pro Bolt aluminum & titanium
Unique idea and nifty engineering. Superb smooth finish in your choice of colour literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and Rear Brake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-RESO10P | Make: Pro Bolt aluminum & titanium
Unique idea and nifty engineering. Superb smooth finish in your choice of colour literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and Rear Brake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-RESO10R | Make: Pro Bolt aluminum & titanium
Unique idea and nifty engineering. Superb smooth finish in your choice of colour literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and Rear Brake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-RESO40B | Make: Pro Bolt aluminum & titanium
Aluminium Reservoir Cap Oblong 47mm x 68mm (2 x 415mm) Blue Unique idea and nifty engineering. Superb smooth finish in your choice of colour literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and Rear Brake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-RESR10B | Make: Pro Bolt aluminum & titanium
Aluminium Reservoir Cap Round Threaded 61mm o/d Blue Unique idea and nifty engineering. Superb smooth finish in your choice of colour, literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and Rear Brake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-RESR10BK | Make: Pro Bolt aluminum & titanium
Aluminium Reservoir Cap Round Threaded 61mm o/d Black Unique idea and nifty engineering. Superb smooth finish in your choice of colour , literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and RearBrake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-RESR10G | Make: Pro Bolt aluminum & titanium
Aluminium Reservoir Cap Round Threaded 61mm o/d Gold Unique idea and nifty engineering. Superb smooth finish in your choice of colour , literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and RearBrake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-RESR10P | Make: Pro Bolt aluminum & titanium
Aluminium Reservoir Cap Round Threaded 61mm o/d Purple Unique idea and nifty engineering. Superb smooth finish in your choice of colour , literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and Rear Brake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-resr10r | Make: Pro Bolt aluminum & titanium
Aluminium Reservoir Cap Round Threaded 61mm o/d Red Unique idea and nifty engineering. Superb smooth finish in your choice of colour , literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and RearBrake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-resr10s | Make: Pro Bolt aluminum & titanium
Aluminium Reservoir Cap Round Threaded 61mm o/d Silver Unique idea and nifty engineering. Superb smooth finish in your choice of colour , literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and RearBrake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
€28.76
In stock Delivery time unknown ()
Ref: PB-BARENDKA10B | Make: Pro Bolt aluminum & titanium
A bit of colour where you can see it. These are supplied complete with necessary fittings. Material High tensile anodised Aluminium.
€28.57
In stock Delivery time unknown ()
Ref: PB-BARENDKA10G | Make: Pro Bolt aluminum & titanium
High Tensile Anodised Aluminium Bar Ends .A bit of colour where you can see it. These are supplied complete with necessary fittings.
€28.57
In stock Delivery time unknown ()
Ref: PB-TI3DISCKAWSUZ-M | Make: Pro Bolt aluminum & titanium
Titanium Disc Rotor bolts. A must for any racer or those who simply wish to replace rusty originals! A replica of manufacturers original design but in superior quality material. Our Titanium 6Al -4V (grade 5) bolts are highly corrosion resistant, extremely light (40% weight saving!) and with rolled threads offers excellent strength and quality. Please refer to our product packaging supplied with the goods for torque settings. Why not check out our model specific listing and upgrade you caliper bolts at the same time? Please note if a coloured finish is selected in titanium this may not be identical to our Aluminium range.
From €27.47
In stock Delivery time unknown ()
Ref: PB-FSU078R | Make: Pro Bolt aluminum & titanium
Our Aluminium fasteners are made from 7075T6 Aluminium, and suitable for use in all non -safety critical areas. They are available in Black, Blue, Gold, Orange Purple, Red and Silver, so you can really make your bike stand out.
Our fairing kits include all the fasteners required to replace the original visible bolts (where applicable)on the:
- Side fairings
- Front mudguard
- Belly pan
- Seat unit
- Nose cone
Fairing kits usually contain a variety of sizes of dome head bolts.
Some kits however will also include Countersunk Bolts and Washers to replicate large headed bolts and Allen bolts to fit inrecesses.
Where Quick Release kits are available for certain models of bike, the 1/4 turn fasteners are offered with a choice of either D-Ring or Allen Key fastening. Clips are also included if applicable.
Kits are easy to use, remove one bolt at a time, and replace with an identical lengthPro-Boltin to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Also included in the kit is:
- Copper Grease Sachet
- Anti -scratch washers
- Plastic Tubing
- Relevant Allen keys
- Pro-Bolt Decal Sticker
€26.34
In stock Delivery time unknown ()
Ref: pb-fsu078 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Our Aluminium fasteners are made from 7075T6 Aluminium, and suitable for use in all non -safety critical areas. They are available in Black, Blue, Gold, Orange Purple, Red and Silver, so you can really make your bike stand out.
Our fairing kits include all the fasteners required to replace the original visible bolts (where applicable)on the:
- Side fairings
- Front mudguard
- Belly pan
- Seat unit
- Nose cone
Fairing kits usually contain a variety of sizes of dome head bolts.
Some kits however will also include Countersunk Bolts and Washers to replicate large headed bolts and Allen bolts to fit inrecesses.
Where Quick Release kits are available for certain models of bike, the 1/4 turn fasteners are offered with a choice of either D-Ring or Allen Key fastening. Clips are also included if applicable.
Kits are easy to use, remove one bolt at a time, and replace with an identical lengthPro-Boltin to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Also included in the kit is:
- Copper Grease Sachet
- Anti -scratch washers
- Plastic Tubing
- Relevant Allen keys
- Pro-Bolt Decal Sticker
From €30.00
In stock Delivery time unknown ()
Ref: PB-BARENDHO20G | Make: Pro Bolt aluminum & titanium
High Tensile Anodised Aluminium Bar Ends .A bit of colour where you can see it. These are supplied complete with necessary fittings.
€26.26
In stock Delivery time unknown ()
Ref: PB-BARENDUN10S | Make: Pro Bolt aluminum & titanium
Aluminium Pair Smooth Universal Bar Ends Silver High Tensile Anodised Aluminium Bar Ends. A bit of colour where you can see it. These are supplied complete with necessary fittings.
€26.10
In stock Delivery time unknown ()
Ref: PB-SKDUC10G | Make: Pro Bolt aluminum & titanium
Aluminium Screen Kit (4mm Italian Bikes) 10 Bolts Gold Complete the look of your fairing. This Kit contains bolts, nuts and Anti -Scratch washers to fit around your screen and compliments our fairing kit. Material High Tensile Anodised Aluminium.
€25.86
In stock Delivery time unknown ()
Ref: PB-SKDUC10R | Make: Pro Bolt aluminum & titanium
Aluminium Screen Kit (4mm Italian Bikes) 10 Bolts Red Complete the look of your fairing. This Kit contains bolts, nuts and Anti -Scratch washers to fit around your screen and compliments our fairing kit. Material High Tensile Anodised Aluminium.
€25.86
In stock Delivery time unknown ()
Ref: PB-SKDUC10B | Make: Pro Bolt aluminum & titanium
Aluminium Screen Kit (4mm Italian Bikes) 10 Bolts Blue Complete the look of your fairing. This Kit contains bolts, nuts and Anti -Scratch washers to fit around your screen and compliments our fairing kit. Material High Tensile Anodised Aluminium.
€25.86
In stock Delivery time unknown ()
Ref: PB-FSU201BK | Make: Pro Bolt aluminum & titanium
Our Aluminium fasteners are made from 7075T6 Aluminium, and suitable for use in all non -safety critical areas. They are available in Black, Blue, Gold, Orange Purple, Red and Silver, so you can really make your bike stand out.
Our fairing kits include all the fasteners required to replace the original visible bolts (where applicable)on the:
- Side fairings
- Front mudguard
- Belly pan
- Seat unit
- Nose cone
Fairing kits usually contain a variety of sizes of dome head bolts.
Some kits however will also include Countersunk Bolts and Washers to replicate large headed bolts and Allen bolts to fit inrecesses.
Where Quick Release kits are available for certain models of bike, the 1/4 turn fasteners are offered with a choice of either D-Ring or Allen Key fastening. Clips are also included if applicable.
Kits are easy to use, remove one bolt at a time, and replace with an identical lengthPro-Boltin to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Also included in the kit is:
- Copper Grease Sachet
- Anti -scratch washers
- Plastic Tubing
- Relevant Allen keys
- Pro-Bolt Decal Sticker
€25.26
In stock Delivery time unknown ()
Ref: PB-BARENDYA20G | Make: Pro Bolt aluminum & titanium
Aluminium Pair Bar Ends Yamaha 20 Gold High Tensile Anodised Aluminium Bar Ends. A bit of colour where you can see it. These are supplied complete with necessary fittings.
€24.89
In stock Delivery time unknown ()
Ref: PB-BARENDSU30G | Make: Pro Bolt aluminum & titanium
Aluminium Pair Bar Ends Suzuki 30 Gold High Tensile Anodised Aluminium Bar Ends a bit of colour where you can see it. These are supplied complete with necessary fittings.
€24.79
In stock Delivery time unknown ()
Opening hours customer service:
Mon-Fri: 9 am - 12 pm and 1 pm - 5 pm
Saturday: 9 am - 12 pm
ATTENTION: We are temporarily available by phone only from 1pm. For urgent questions, please email info@bike-design.com
Contact usBike Design Benelux accepts the following payment methods:
Bike Design helps passionate motorcyclists get the best out of their bike, since 1993. Our team rides off-roads, motorscooters, road race, Harley, touring bikes and allroads, so we know precisely how our products contribute to a better ride. Our shelves only contain products of which we are satisfied users ourselves.
Each year, over 1.000 motorcycle dealers and thousands of returning end users give us their faith – and feedback – so we know exactly what to recommend. So check out which renown brands we have in store for your bike and feel free to ask our opinion or advice!
Bike Design Benelux
Industrieterrein Hoogveld
Vriesenrot 14
B-9200
Dendermonde
Belgium
info@bike-design.be
Phone: +32 52 45.33.61
Fax: +32 52 45.33.71
VAT: BE 0451.634.077
