Ref: nlt-sms5.0reb | Make: 4Racing
Diameter: 50 mm
SOLD OUT - Clip-ons with eccentric tubes 15mm raised: clamp Ø50mm - angle 10° - type B
From €351.00
Usually available at the manufacturer Delivery time unknown ()
From €127.40
Usually available at the manufacturer Delivery time unknown ()
Ref: pb-qrpackriv17 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Quick release fastener 17mm + rivet-on receptical - 10 pieces
From €88.05
In stock Delivery time unknown ()
Ref: pb-cabsety40/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Chain tighteners (complete set: 2 blocks + 2 bolts + 2 nuts)
€90.70
In stock Delivery time unknown ()
Ref: pb-fbm060 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Fairing Kit BMW R1150RT 01-05
All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable. Kits are easy to use remove one bolt at a time, and insert an identical length Pro-Bolt in to your original backing clip. Where this is not possible we include appropriate nuts
. Should you wish to replace any worn original receptacles they are available to order separately.
Our Aluminium dome head fairing bolts are made from Grade 7075 which is an incredible 60% lighter than your originals. With 7 colour options available, you choose the look; from bright blue to subtle silver our Aluminium fairing kits are a great way to customise your bike and make it truly unique.
Also included in the kit are Pro -Lube, Anti -Scratch washers and the relevant Allen keys. Instructions are provided for torque settings.
Please note screen kits are sold separately.
From €80.60
In stock Delivery time unknown ()
Ref: pb-qrclip1014 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Quick Release D-Ring 14mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our D-Ring 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Please note backing plates are not included but are available to order separately as both slide and rivet on fixings.
From €58.56
Sold out
Ref: pb-qrclip1017 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Quick Release D-Ring 17mm Pack x 10 Pro-Bolt's own style anodised Aluminium 6mm quarter turn fastener. Used by Racers our D-Ring 1/4 turn fasteners are super lightweight and super quick to use. Length measured from under the head to the tip. Included in the pack are anti -scratch plastic washers to protect the fairing and steel 'grippa' washers to place on the stud at the back of the fairing to prevent clips dropping out when loosened. Please note backing plates are not included but are available to order separately as both slide and rivet on fixings.
From €58.56
In stock Delivery time unknown ()
Ref: pb-pload2017/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Pre-load adjusters
€47.11
In stock Delivery time unknown ()
Ref: pb-lgrodf66255/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Gear shift rod - 255mm
€41.15
In stock Delivery time unknown ()
Ref: pb-lgrodf68240/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Gear shift rod - 240mm
€41.15
In stock Delivery time unknown ()
Ref: pb-fho212 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Aluminium Fairing Kit Honda CBR1000 RR 04-05
All the bolts to replace original visible fasteners on side fairings, front mudguard, belly pan, seat unit and nose cone where applicable.
Kits are easy to use remove one bolt at a time, and insert an identical length Pro-Bolt in to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Our Aluminium dome head fairing bolts are made from Grade 7075 which is an incredible 60% lighter than your originals. With 7 colour options available, you choose the look; from bright blue to subtle silver our Aluminium fairing kits are a great way to customise your bike and make it truly unique.
Also included in the kit are Pro -Lube, Anti -Scratch washers and the relevant Allen keys. Instructions are provided for torque settings.
Please note screen kits are sold separately.
From €60.45
In stock Delivery time unknown ()
From €40.31
Usually available at the manufacturer Delivery time unknown ()
Ref: nlt-cpf03 | Make: 4Racing
Type: Reservoirs
SOLD OUT - Brake oil reservoir cover
From €33.80
Usually available at the manufacturer Delivery time unknown ()
Ref: pb-resr30/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Clutch oil reservoir cover
€32.25
In stock Delivery time unknown ()
€42.25 €27.47
In stock Delivery time unknown ()
€41.60 €27.04
In stock Delivery time unknown ()
Ref: pb-fsu078 | Make: Pro Bolt aluminum & titanium
Material: Aluminium
Our Aluminium fasteners are made from 7075T6 Aluminium, and suitable for use in all non -safety critical areas. They are available in Black, Blue, Gold, Orange Purple, Red and Silver, so you can really make your bike stand out.
Our fairing kits include all the fasteners required to replace the original visible bolts (where applicable)on the:
- Side fairings
- Front mudguard
- Belly pan
- Seat unit
- Nose cone
Fairing kits usually contain a variety of sizes of dome head bolts.
Some kits however will also include Countersunk Bolts and Washers to replicate large headed bolts and Allen bolts to fit inrecesses.
Where Quick Release kits are available for certain models of bike, the 1/4 turn fasteners are offered with a choice of either D-Ring or Allen Key fastening. Clips are also included if applicable.
Kits are easy to use, remove one bolt at a time, and replace with an identical lengthPro-Boltin to your original backing clip. Where this is not possible we include appropriate nuts.
Should you wish to replace any worn original receptacles they are available to order separately.
Also included in the kit is:
- Copper Grease Sachet
- Anti -scratch washers
- Plastic Tubing
- Relevant Allen keys
- Pro-Bolt Decal Sticker
From €30.00
In stock Delivery time unknown ()
From €24.70
Usually available at the manufacturer Delivery time unknown ()
Ref: pb-resr70 | Make: Pro Bolt aluminum & titanium
Type: Reservoir caps
Aluminium Clutch Reservoir Cap Round Ducati/Brembo Unique idea and nifty engineering. Superb smooth finish in your choice of colour , literally in your face. Get rid of the ugly black plastic stock originals. We offer a wide range of reservoir caps to fit Front Brake, Clutch and Rear Brake Cylinders on a huge range of models. Comes complete with countersunk bolts where necessary. Measurements are the outside diameter. Use your original membrane. Material High Tensile Anodised Aluminium.
From €22.98
In stock Delivery time unknown ()
Ref: pb-lofck20/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Oil filler cap
€22.16
In stock Delivery time unknown ()
Ref: pb-lofck30/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Oil filler cap
€22.16
In stock Delivery time unknown ()
Ref: pb-lofcy20/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Oil filler cap
€22.16
In stock Delivery time unknown ()
Ref: pb-ltyoke10/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Top yoke nut
€22.16
In stock Delivery time unknown ()
Ref: pb-ltyoke20/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Top yoke nut
€22.16
In stock Delivery time unknown ()
Ref: pb-lofcy30/b | Make: Pro Bolt aluminum & titanium
Color: Blauw
Oil filler cap
€22.16
In stock Delivery time unknown ()
Opening hours customer service:
Mon-Fri: 9 am - 12 pm and 1 pm - 5 pm
Saturday: 9 am - 12 pm
ATTENTION: We are temporarily available by phone only from 1pm. For urgent questions, please email info@bike-design.com
Contact usBike Design Benelux accepts the following payment methods:
Bike Design helps passionate motorcyclists get the best out of their bike, since 1993. Our team rides off-roads, motorscooters, road race, Harley, touring bikes and allroads, so we know precisely how our products contribute to a better ride. Our shelves only contain products of which we are satisfied users ourselves.
Each year, over 1.000 motorcycle dealers and thousands of returning end users give us their faith – and feedback – so we know exactly what to recommend. So check out which renown brands we have in store for your bike and feel free to ask our opinion or advice!
Bike Design Benelux
Industrieterrein Hoogveld
Vriesenrot 14
B-9200
Dendermonde
Belgium
info@bike-design.be
Phone: +32 52 45.33.61
Fax: +32 52 45.33.71
VAT: BE 0451.634.077
